Service Sinks

Model Number



This Service Sink is designed for areas with an accessible pipe chase. The fixture is fabricated using heavy gauge type 304 stainless steel, welded to form a vandal resistant unit. Internal piping is stainless steel. The fixture is designed with a 12” (305mm) high back splash and integral high capacity strainer on the drain outlet. Sink bowl interior dimensions are 18” long x 16” wide x 10” deep (457mm x 406mm x 254mm). Standard drain piping is a 2 3/8” (60mm) OD elbow waste piped 4” (102mm) past the back of the fixture with a plain end for connection to waste pipe using a stainless steel banded rubber adapter coupling. Exposed surfaces are polished to a satin finish. Valves and valve outlets must be specified separately.