Front Mounted on Floor Fixture
This Service Sink is designed for areas without an accessible pipe chase. The fixture is fabricated using heavy gauge type 304 stainless steel, welded to form a vandal resistant unit. Internal piping is stainless steel. The fixture is designed with a 12” (305mm) high back splash and integral high capacity strainer on the drain outlet. Sink bowl interior dimensions are 18” long x 16” wide x 10” deep (457mm x 406mm x 254mm). Standard drain piping is a 2 3/8” (60mm) OD elbow waste piped 4” (102mm) past the back of the fixture with a plain end for connection to waste pipe using a rubber adapter coupling. Exposed surfaces are polished to a satin finish. Valves and valve outlets must be specified separately.